*** THIS KIT WILL BEGIN SHIPPING ON 2/1/25 *** Built to cover the user that does it ALL; the armorer, the gunsmith, the range owner, the competition shooter, and firearms aficionados. Nearly every tool that FIS makes is packed into one indestructible waterproof NanukA(R) hard case. This won&';t fit in your pocket like our other kits, but is still go anywhere ready weighing in under 10lbs and measuring 13" wide x 11" tall x 6.5" deep. The organized selection covers all of your general needs in bits, cleaning tools, and punches. No platform or accessory are overlooked with specialized tools for AR&';s, battery doors, GlockA(R), Sig SauerA(R), & Shotguns. Torque tools are available in options of both All-In-One Drivers (All-In-One Torque Driver 15-65 inLbs & Mini All-In-One Torque Driver 6-25 in-Lbs) or a curated selection of Individual Torque Limiters (10, 15, 20, 25, 30, 35, 45, 55, 60, 65, 80 in-Lbs) . The Pro Armorer&';s Toolkit is the ultimate on-the-go gunsmithing resource. Each Pro Armorer&';s Toolkit also includes: Ratchet T-Handle w/Locking Hex Drive Extension/punch holder 1/2" Socket/Adapter Shotgun Choke Wrench 1911 Bushing Wrench Spring Tool E2 Slide Punch Grip Screw Bit Sight tool for GlockA(R) Mag Tool for GlockA(R) Channel Remover for GlockA(R) Channel Installer for GlockA(R) Brass Hammer Head Bolt Group Scrapers (.223, .308) Castle Nut Wrench A2 Sight Adjuster Extractor Tool (.223, .308) Pivot Pin Tools (AR10, AR15) Bolt Catch Pin Punch(With Nylon Surface Protector) Non-marring Plastic Pin Punch RemingtonA(R) 700 Bolt Opener Steel Pick Mini Pry Bar Bronze Scraper Set of two 8-32 adapters 3 Cleaning Brushes (Nylon Medium and Hard Bristle & Bronze Hard Bristle) AimpointA(R) Bit Battery Cap Tool Coin Slot Battery Cap Tool 3/8" Adjustment Wrench Scope Jack Machined Aluminum Bubble Level Set Magnetic level & rail clamp level/anti-cant device with precise UK-sourced bubble vials Cleaning Rod/Bore Obstruction Kit a Six precision machined stainless steel rods (8-32 thread) a Six .22 caliber brass bore adapters a Six .30 caliber brass bore adapters a Six 6.5 Creedmoor caliber brass bore adapters a .22 caliber obstruction tip a .30 caliber obstruction tip a 6.5 Creedmoor caliber obstruction tip a Double ball bearing drive adapter a Small Parts Holder a Carrying Case Magnetic Tray Bench Block Large Parts Holder 4 Medium Parts Holders Steel Pin Punch set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4) Brass Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4) Roll Pin Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4) Roll Pin Starter Punch Set (1/16, 3/32, 1/8, 5/32, 3/16, 1/4) 40 Electroless Nickel Plated Bits (1" in length): Hex: 2x 0.050", 2x 1/16", 2x 5/64",, 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 2x 1.5mm, 2x 2mm, 2x 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm Screwdriver: 2x PH0, PH1, PH2, 2x 3/32", 3/16, 1/4 Torx: 2x T6, T8, T10, T15, T20, T25, T27, T30 24 Electroless Nickel Plated Bits (2" in length): Hex: 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm Screwdriver: PH1, PH2, PH3, 4mm, 5mm, 6mm Torx: T10, T15, T20, T25, T27, T30 6 Extended Action Bits (4" in length):Hex: 5/64", 1/8", 5/32", 5mm Torx: T30 Nanuk(TM) 905 Waterproof Case w/ laser cut foam insert organizers a Waterproof (IPX7) a Dust proof (IP6X) a MIL-SPEC certified WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
